VVDI Key Max Features:

1.Covers MINI Key Tool,key tool function. The remote/transponder,remote renew function are the same as the previous MINI KEY TOOL/KeyTool.

2.Added IC Copy function

3.Key Tool max can connect MINI OBD to work together.

4.VVDI Max no need connect computer to update firmware,connect with inernet,update in VVDI.

5.Firmware version: V1.3.3 VVDI Max no need connect computer to update firmware, connect with Inernet, update in VVDI.

6.Adopts HD LCD screen with clear interface, easy to use and flexibility.

7.Convenient for connecting Xhorse Key Cutting machine,MINI OBD TOOL and other products to do specific operations.

8.How to get free ID48 96bit function?

Please use VVDI Max to generate Xhorse new remote key 10pcs,after collect points,1 hour later,server will open ID48 96bit function free.

VVDI Key Tool Max Function:

Generate remote and smart key

Program and Immo transponder

Generate speical transponder

Renew remote

Recognize and copy access card

Generate and copy garage remote

Frequency detection and copy remote

Connect to Xhorse key cutting machine

Special function (VVDI Special TP, Unlock Toyota Smart Key, Special 4D to 4C, ID63 to ID83, VVDI smart key clone, VVDI remote repair calibration etc)

Generate transponder,Transponder Clone, Generate Remote,Remote Clone, OBD matching, transponder/remote/smart card, Clone IC/ID card.

How to Use VVDI Key Tool Max?

Step 1: Read the vehicle data (VIN & immobilizer) via OBD utilizing the soon-to-be released Mini OBD Tool.

Step 2: View the remote and transponder chip information for the vehicle you’re plugged into and instantly generate your chip and key.

Step 3: View the proper keyway for cutting on the Dolphin and cut your blade (once you’ve Lishi’d to determine your cuts).

Step 4: Take your completed key back to the vehicle for immobilizer programming

VVDI Key Tool Max Connect to MINI OBD TOOL

There are 3 ways for Key Tool Max connect to MINI OBD TOOL:

1--USBTYPE-C cable

2--WIFI

3--Bluetooth

1) Click on the [Select] on the HOME page,available device will be shown on the screen,choose device to connect according to Serial Number

2) Software will detect current device with software interface connection status,WLAN connection status and WIFI connection status.

VVDI Key Tool Connect to Xhorse Key Cutting Machine:

Key Tool MAX connects to Key Cutting Machine by Bluetooth to do cutting operations.

VVDI Mini OBD Tool Function

VVDI Mini OBD Tool Main Functions:

Immo programming

Throttle Program

More Functions:

Battery Programming（Not yet open）

KM Correction（Not yet open）

Steering Angle Calibration（Not yet open）

Key code learning（Not yet open）

EABS Programming（Not yet open）

Remote manual programming（Not yet open）

Maintenance Light Reset（Not yet open）

Vehicle Diagnosis（Not yet open）

Tire Pressure Light Reset（Not yet open）

OBD2 Diagnostic, Immo Programming, Maintenance Light Reset,Throttlebody Learning, KM Calibration and more functions are under development. 

The port which is used to connect the programmer is reserved. After the expansion, the chip can be written start data, and the operation of the IC reading data is equivalent to the function of the Original Tango.

KEY TOOL MAX can also be connected with Xhorse Dolphin XP-005 key machine via bluetooth, to be used like operating screen of Dolphin XP-005.

VVDI Key Max Parameter

Battery capacity: 3375mAh

Battery life>6 hours

Standby time>5 days

Recharging current: 1500mAh

Brightness>400nlts

Screen resolution: 1280*720P

Camera resolution: 800W