Vgate vLinker BM+ OBD 2 ELM327 V2.2 For BMW Scanner Bluetooth-compatible 4.0 / WIFI ELM 327 IOS Android OBD2 Car Diagnostic Tool

Attention :

1.we only sell adapter，But we are not responsible for any charges for this software，please know this

2.If you use BT4.0 to Connected, please connect BT directly in the diagnostic APP

3.Vlinker BM also support other brand cars withOBD2 standard protocols

Vgate vLinker BM / BM+ Supported for BMW models:

For BMW 1 Series F20 F21

For BMW 2 Series F22 F23 F87

For BMW 2 Series Active Tourer F45

For BMW 2 Series Gran Tourer F46

For BMW 3 Series F30 F31 F34 F35 F80

For BMW 4 Series F32 F33 F36 F82 F83

For BMW 5 Series FO7 F10 F11 F18 F90

For BMW 5 Series G30 G31

For BMW 6 Series F06 F12 F13

For BMW Series F01 F02 F03 F04

For BMW 7 Series G11

For BMW X1 F48

For BMWX2 F39

For BMW X3 F25

For BMW X3 GO1

For BMW X4 F26

For BMW X5 F15 F85

For BMWX6 F16 F86

For BMW i3

For BMW i8

For Mini F54 F55 F56 F57 F60

Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink

for BMW professional diagnosis/activation/adjustment scanner:

1.Read/Clear DTC

2.Engine RPM

3.Module Reset

4.Module Activation

5.Remote Control

6.Regeneration

7.Automatic sleep/start

8.Battery Tester

Vgate Vlinker BM+ 100% ORIGINAL compatible with 95 % + world car models

1.Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link

2.Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software

3.Support for BMW adjustment and programming

4.OBD2 Standard Protocols + More protocols

5.Fully automatic operation

6.Automatic sleep / start

Supported APP:

Support Protocols

Multiple protocols：

--15 ELM format protocols;

-- 23 STN format protocols;

-- Up to 64 user-defined protocols.

OBDII 5 standard protocols：

-- SAE J1850 VPW

-- SAE J1850 PWM

-- ISO 9141-2

-- ISO 14230-4

-- ISO 15765-4 CAN

Additional protocols：

-- SAE J1939 CAN

-- ISO 11898 (raw CAN)

These protocolscover almost 99% of the OBDII Cars on the market

Rich instruction set, compatible with more APP software：

-- Fully compatible with ELM's AT command set;

-- Fully compatible with STN's ST command set;

--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

-- Compatible with ELM and STN power management solutions.

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage , OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

-- Device sleep power consumption is less than 2 mA.

-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

-- Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

-- Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

-- Secure bootloader for easy firmware updates

Packing List :