Vgate Vlinker Bm+ Elm327 V2.2 Bluetooth 4.0 Wifi For Scanner Obd 2 Obd2 Car Diagnostic Auto Tool Elm 327 Odb2 For Bimm
1.we only sell vLinker BM+ perfect fit for BimmerCode/BimmerLink，But we are not responsible for any charges for this software，please know this
2.If you use Bluetooth 4.0 to Connected, please connect Bluetooth directly in the diagnostic APP
3.Vlinker BM+ also support other brand cars withOBD2 standard protocols
How to choose vlinker BM you need?
Vgate Vlinker BM+WIFI for Android Phone + Iphone
Vgate Vlinker BM+BluetoothV4.0 for Android phone + Iphone
Vgate Vlinker BM+Bluetooth V3.0 for Android PhoneSupported for BMW models:
For BMW 1 Series F20 F21
For BMW 2 Series F22 F23 F87
For BMW 2 Series Active Tourer F45
For BMW 2 Series Gran Tourer F46
For BMW 3 Series F30 F31 F34 F35 F80
For BMW 4 Series F32 F33 F36 F82 F83
For BMW 5 Series FO7 F10 F11 F18 F90
For BMW 5 Series G30 G31
For BMW 6 Series F06 F12 F13
For BMW Series F01 F02 F03 F04
For BMW 7 Series G11
For BMW X1 F48
For BMWX2 F39
For BMW X3 F25
For BMW X3 GO1
For BMW X4 F26
For BMW X5 F15 F85
For BMWX6 F16 F86
For BMW i3
For BMW i8
For Mini F54 F55 F56 F57 F60
Vgate Vlinker BM+ Vehicle Coverage:
1. America Car List: (include Brazil)
Need standard obd2 , and release from 2001 years to now
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep
2. Europe Car List:
Need standard obd2 , and release from 2004 years to now
Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot ,Fit for Renault
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar
3. Asia Car List: (include Australia)
Japanese car Need standard obd2 , and release from 2006 years to now
Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota
Chinese car Need standard obd2 , and release from 2011 years to now
Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry
4. Russia Car List:
For Ssangyong Actyon , A200 XDI Diesel , from 2007 to 2017 years ; 2.4 Diesel , from 2009 to 2017 years.
For Ssangyong Korando , 2.0 TD Diesel , from 2013 to 2017 years.
For Ssangyong Kyron , 2.0 Diesel , from 2007 to 2017 years.
For Ssangyong Rexton , 2.7 XVT Diesel , 2007 years or 2011 to 2017 years,
For Ssangyong Rodius , 2.7 Diesel , 2007 to 2017 years.
For LADA Niva , 1.7 Gasoline , from 2011 to 2017 years.
For LADA Priora , 1.5 Gasoline , from 2008 to 2017 years.
If you are not sure whether it compatible with your car, please do not hesitate to contact us first,
Tell us your car model , release year, Vehicle Capacity, diesel or gasoline, 12v or 24v engine work voltage.
for example : for Audi A4, 2011 year, 2.0 TDI, Diesel, 12v.
Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink for BMW professional diagnosis/activation/adjustment scanner:
100% Original Adapter compatible with 95 % + world car models
1. Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link
2. Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software
3. Support for BMW adjustment and programming
4. OBD2 Standard Protocols + More protocols
5. Fully automatic operation
6. Automatic sleep / start
Perfectly compatible with BimmerCode
Perfectly compatible with BimmerLink
--15 ELM format protocols;
-- 23 STN format protocols;
-- Up to 64 user-defined protocols.
OBDII 5 standard protocols：
-- SAE J1850 VPW
-- SAE J1850 PWM
-- ISO 9141-2
-- ISO 14230-4
-- ISO 15765-4 CAN
-- SAE J1939 CAN
-- ISO 11898 (raw CAN)
These protocols cover almost 99% of the OBDII Cars on the market.
Rich instruction set, compatible with more APP software：
-- Fully compatible with ELM's AT command set;
-- Fully compatible with STN's ST command set;
--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.
-- Compatible with ELM and STN power management solutions.
-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;
-- Support UART active, battery voltage , OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.
-- Device sleep power consumption is less than 2 mA.
-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.
-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
-- 256-byte storage unit
-- More than 100,000 erasable times
-- Read and write operations on any unit in the storage area by using the VT command
-- Mix ID Sending" mode of CAN protocol.
-- Optional formatted send data according to protocol
-- Multiple WM sequence settings
-- Support AT command to manually set WM sequence
-- Support for specifying a protocol or a full protocol-wide temporary WM sequence
-- Support for a permanent link between a protocol and a private WM sequence
-- Secure bootloader for easy firmware updates
Vgate Vlinker BM+ Supports other APP :
BimmerCode, BimmerLink, TORQUE Lite/ProOBD, Fusion, DashCommand, Car Scanner ELM OBD2Carista OBD2, JScan, OBD Auto Doctor, LeafSpy, Dr.Prius, TrackAddict, Harry's LapTimer, inCarDoc, etc
The Software Shows :
Easy To Use
How to connect Vliner BM+ well with the software to use ?
For Android Phone :
Step 1 :lnsert the adapter into the OBD interfaceof the car, Turn ignition to Key On Engine Off Position. Open the Bluetooth settings. Search forthe device name"vLinker BM-Android"and click Pair.
Step 2 :Enter the pairing code: 1234 lf thepairing is successful, you can open theAPP to set up the connection.
Note: Please select the BluetoothDevice Name "vLinker BM-Android"(Searching for Bluetooth may takesome time.)
Step 3 :open the app's Settings .
Step 4 :Select Adapter "vLinker Bluetooth"
Spte 5 :Return to the main page of the app, clickCONNECT.
For IOS system :
Step 1 :Insert the adapter into the OBD interface of the car.Turn ignition to Key On Engine Off Position.-button on the ios device and continuetotheOBD appsetting.
Note:Cannat see Eluetoothaename in iPhone?
Dont worrv.This Device onlv reauire toeoaure Bluetth device name in the OBD app Settina.lustenable Bluetooth button on the los Device and continue to the obd app setting in step2ONLY ios supported Bluetooth profilas can show device name.
Bluetooth LE 4.0 technology isnitapply forthe supported.
Step 2 :open BimmerCode APP, Click Setting, Enter the Setting Menu Page.
Step 3 :click Adapter.
Step 4 :Select Adapter For "vLinker Bluetooth” , then click on the upper left corner return.
Step 5 :Click"Done" back to the main page of the APP.
Step 6 :Enter the main page click Connect
Step 7 :Choose your vehicle model (eg: BMWw 7 Series...)
Step 8 :wait for BimmerCode APP to communicate with the car.
Step 9 :lf the communication is successful , you can select the control unit you wan.. .
How to see if my vehicle is compliant with OBD II?
Please pop the hood and look for a sticker named "VEHICLEEMISSION CONTORL INFORMATION".
Vgate vLinker BM+ Packing List :
1 x Vgate vLinker WIFI/BT3.0/BT4.0
1 x User manual