How to choose？

OBD2 Vgate vLinker BM+ ELM327 V2.2 For BMW Scanner Bluetooth-compatible 4.0 wifi OBD 2 Car Diagnostic Auto Tool Bimmercode PK ELM 327 V 1 5

Purchase Notes：

1.Our store sells the original Vgate，We have software to test if is original Vgate, if you need you can contact us，Avoid getting fake vgate from other stores

2.If you use BT 4.0 to Connected, please connect BT directly in the diagnostic APP

3.Vlinker BM+ also support other cars withOBD2 standard protocols

Vgate vLinker BM+ Supported for BMW models:

For B*MW 1 Series F20 F21
For B*MW 2 Series F22 F23 F87
For B*MW 2 Series Active Tourer F45
For B*MW 2 Series Gran Tourer F46
For B*MW 3 Series F30 F31 F34 F35 F80
For B*MW 4 Series F32 F33 F36 F82 F83
For B*MW 5 Series FO7 F10 F11 F18 F90
For B*MW 5 Series G30 G31
For B*MW 6 Series F06 F12 F13
For B*MW Series F01 F02 F03 F04
For B*MW 7 Series G11
For B*MW X1 F48
For B*MWX2 F39
For B*MW X3 F25
For B*MW X3 GO1
For B*MW X4 F26
For B*MW X5 F15 F85
For B*MWX6 F16 F86
For B*MW i3
For B*MW i8
For Mini F54 F55 F56 F57 F60

Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink for BMW professional diagnosis/activation/adjustment scanner:

1.Read/Clear DTC
2.Engine RPM
3.Module Reset
4.Module Activation
5.Remote Control
6.Regeneration
7.Automatic sleep/start
8.Battery Teste

Vgate Vlinker BM+ 100% ORIGINAL ADAPTERcompatible with 95 % + world car models

1.Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link
2.Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software
3.Support for BMW adjustment and programming
4.OBD2 Standard Protocols + More protocols
5.Fully automatic operation
6.Automatic sleep / start

Vgate vLinker BM+ Support APPS:

Vgate vLinker BM+ is an adapter that is perfectly compatible with BimmerCode:

Support Protocols Multiple protocols：

--15 ELM format protocols;
-- 23 STN format protocols;
-- Up to 64 user-defined protocols.

OBDII 5 standard protocols：

-- SAE J1850 VPW
-- SAE J1850 PWM
-- ISO 9141-2
-- ISO 14230-4
-- ISO 15765-4 CAN

Additionalprotocols：Theseprotocolscover almost 99% of the OBDII Cars on the market

-- SAE J1939 CAN
-- ISO 11898 (raw CAN)

Rich instruction set, compatible with more APP software：

-- Fully compatible with ELM's AT command set;
-- Fully compatible with STN's ST command set;
--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.
-- Compatible with ELM and STN power management solutions.
-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage , OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.
-- Device sleep power consumption is less than 2 mA.
-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.
-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
-- 256-byte storage unit
-- More than 100,000 erasable times
-- Read and write operations on any unit in the storage area by using the VT command
-- Mix ID Sending" mode of CAN protocol.
-- Optional formatted send data according to protocol
-- Multiple WM sequence settings
-- Support AT command to manually set WM sequence
-- Support for specifying a protocol or a full protocol-wide temporary WM sequence
-- Support for a permanent link between a protocol and a private WM sequence
-- Secure bootloader for easy firmware updates

Vgate vLinker BM+ Support Car Models:

1996-Now

How to see is my Vechicle is Comliant with OBDII?

How to use?

How to install it ?(For android System/Type1)

How to install it ?(For IOS System/Type2/3)

Package List: