New Xprog 6.26 Xpeldb Ecu Chip Programmer Tuning Tool With Usb Dongle More Functions Than Xprog-M V5.55/5.74/5.84/5.86
ATTETION for Xprog V6.26 ECU Programmer:
1. It must be used online (PLEASE connect internet to use it);
2. The time of the computer must be adjusted to be accurate local time;
3. You must install V6.26 register file;
4. Only support English WINDOWS system, please do not use other language system;
5. Close the software after using the programmer;
6. When you are not using the programmer, please do not open the software on the computer for a long time. You must close the software and unplug the usb dongle from the computer;
Note: Facotory will not repair the machine or be resonponsible for the broken machine if the customer do not do what we rquest above, thanks so much!
XPROG V6.26 NEW !!!
Note :
Software Add some functions:
ITEM 2: XPROG V6.12
XPROG-M V6.12 Highlights:
1. Latest Software Version: V6.12, Firmware: V4.4
2. With USB Dongle, No need activation
3. Adds new authorization: AUTH-0028-1 for Renesas V850 Authorized and AUTH-0028-2 for Renesas SuperH Authorized 2017/10/9
4. Operating System: WinXP/Win7/Win8
5.Language: English only
Using Tips:
Install Notice:
XPROG-M V6.12 windows system required as below:
1. Click the file "installation.reg", get the file information to the regedit.
AUTH-0001 for Motorola HC05 family authorization (allows to read/write EEPROM)
X-PROG V6.12 Newly Added 4 Adapters:
ITEM 4:XPROG V5.55
Highlight of XPROG 5.55:
New Software Version:V5.55
V5.55 Especially For BMW CAS4 DECYPATION
System Requirement:Windows XP/WIN7 32bits Only (close an-virus program,or soft ware attacked)
Add new authorization:AUTH-0025 Authorized 11/4/2014
Without USB Dongle,Software is not encrypted.Feel free to install software.
Note For XPROG V5.55:
1. There is no dongle with this one.
2.Old Version like V5.0/V5.3 tool ,it can not use with this V5.55 .
3.Disconnect internet when run soft ware ,otherwise device will damaged.
4.Don't update online, or hardware broken and can not work any more.
5.Please unistall all old Xprog version clearly ,and make sure install Our XPROG 5.55 only into your PC only .
Please read and following those tips when install Xprog V5.55,otherwise hardware can not use any more .
XPROG-M V5.55 Authorizations:
AUTH-0001 for Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 for Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 for Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 for Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 for Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 for ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 for MB ZGS001 authorization
AUTH-0011 for Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 for Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (for Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (for Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx(New added)
AUTH-0023-2 XC23xx(New added)
AUTH-0024-1 MC9S12Cxx(New added)
AUTH-0024-2 MC9S12XE(New added)
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx (newly added)
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx (newly added)
XPROG-M V5.5.5 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 for Motorola HC05B/X PLCC52 programming adapter
ADP-0005 for Motorola HC05B/X QFP64 programming adapter
ADP-0006 for ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
Computer Requires:
Processor: INTEL Pentium 60MHz or faster (depends on operating system)
Memory (RAM): 64MB (depends on operating system)
Hard drive: 20MB free space
Communication: One free physical COM or USB port
Operating system: Microsoft Windows NT/ME/2000/XP/VISTA/WIN7 32Bits Only
Packing List :
1 x XPROG Unit
19 x Programming Adapter
1 x USB Cable.
1 x CD Software
Real photo show :
