LAUNCH Creader Elite CRE200, ABS SRS OBD2 Scanner/Code Reader/Car Diagnostic Tool/ Touch Screen Screenshot/4 in 1 Live Date Graph/Auto VIN/WiFi Free Update/Share Report via Email

Why Launch Creader Elite CRE200 is the best choice for Car Owners ?

It has the following functions and advantages:

√ Smart (Auto-Detect) Diagnosis:

Once the tool and the vehicle are properly connected, the system starts auto-detect process. Once the whole process is successfully finished, a diagnostic report will be automatically generated.

√ Manual Diagnosis:

If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes: Value, Graph and Merged).

√ OBD II Diagnosis:

10 modes of OBD II test are supported, including EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing, etc.

√ ABS & SRS Diagnostic:

The ABS/SRS diagnostic function is used to retrieve and clear codes from the vehicle's ABS/SRS system.

√ One-Click Update:

Let you update your diagnostic software and APK online.

√ Mall:

This function allows you to purchase more diagnostic software with full system and full functions that are not pre-installed on this tool.(Coming Soon)

√ Diagnostic History:

This function provides a quick access to the tested vehicles and users can choose to view the test report or resume from the last operation, without starting from scratch.

√ Diagnostic Feedback:

Use this option to submit the vehicle issue to us for analysis and troubleshooting.

√ DTC Library:

Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.

√ Turn off the Engine Light:

CRE200 is a new scanner developed by LAUNCH. You can check all engine-related fault codes, find out the cause of the check engine light to turn on, turn off the fault indicator (MIL), and locate the broken O2 sensor.
Displays battery real-time voltage once properly connected to the vehicle.

Launch Creader Elite CRE200 supports Multi-Language:

The scan tool supports multiple languages. You can change the system language to English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, and Traditional Chinese.

Launch Creader Elite 200 Supports ABS + SRS System + OBD2 Diagnostic

LAUNCH CRE200 is specially designed to diagnose electronic control systems of 12V vehicle. It supports 99% of vehicle diagnosis in the world.

Two systems are supported: ABS (Anti-lock Braking System) and SRS (Supplemental Inflatable Restraint System). In addition, it can also do OBD2 diagnosis.

Diagnostic ABS & SRS Airbag

Anti-Lock Braking System (ABS system)

Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.

Supplemental Restraint System (SRS System)

SRS is a safety restraint system of your car, which is made up of impact sensors, a control module, and the airbags themselves, Launch CRE200 scanner can detect every electronic parameter to check its health status.

LAUNCH X431 Creader Elite CRE200 16 Resets Function ( All of them need subscribe ) :

1. Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2. EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system safety and efficiency.

3. BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4. DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5. SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6. TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7. IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8. ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9. Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10. Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11. Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12. AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

14. Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

16. Air Level calibration

LAUNCH X431 Creader Elite CRE200 Full 10 OBD2 Function :

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Auto / Manual Vin Car Scanner

LAUNCH CRE200 professional OBD2 code reader can automatically acquire vehicle VIN number to perform OBD2 diagnosis accurately and efficiently. If the tool can not obtain the VIN information, you can also perform vehicle

diagnosis manually. In this mode, you need to execute the menu-driven command and then follow the on-screen instruction to proceed.

4-IN-1 Graphics Parameters :

If a user records the running parameters or waveform graphs while reading data stream, it will be saved as diagnostic records and appear under this tab.

Diagnostic History

Generally once a vehicle diagnosis is performed, the tool will record the every details of diagnostic session. The History function provides direct access to the previously tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.

Tap “History” on the Diagnose main menu screen, all diagnostic records will be listed on the screen in date sequence.

Plug and Play

Plug the diagnostic cable into the vehicle's DLC port, the screen of CRE200 will will automatically light up and turn on. It is very convenient.

DTC Library

This option enables you to retrieve the detailed description of certain DTC from the local DTC database. Swipe the screen upwards / downwards to alter the value, then press "OK" button, the screen will display definition of the DTC.

Screenshot and Email

After enabling the option of the screenshot function, you can take a screenshot of the data or interface you want at any time during the use of the product.

After the diagnosis is completed, if there is WiFi, you can also click the "Share" button to send the diagnosis report to the mailbox you want to send.

Lifetime Free update, WIFI one-click update

LAUNCH X431 Creader Elite CRE200 Print Function :

LAUNCH X431 Creader Elite CRE200 MALL Function :

Think Function allows you to subscribe other vehciles diagnostic software and reset software that are not pre-installed on the tool .

All Diagnostic sofware in the mall covers full systems and full functions ( Excluding online programming and coding etc ). Different Vehicle software is tagged with different price ( about $49.95/vehicles )

( Pls note : the function does not open now , but do not worry , it will open soon ) .

LAUNCH CRE200 Supports Car Brands

for AUDI, for BMW, for ROLLS ROYCE, for MINI, for CHRYSLER, for DODGE, for JEEP, for CITROEN, for DAEWOO, for FIAT, for ABARTH, for ALFA ROMEO, for LANCIA, for FORD, for LINCOLN, for FORD (EUROPE), for GM, for CHEVROLET, for CADILLAC, for BUICK, for HONDA, for ACURA, for HYUNDAI, for ISUZU, for ISUZU (THAILAND, for KIA, for LAND ROVER/JAGUAR, for MAZDA, for MERCEDES-BENZ, for MAYBACH, for MITSUBISHI, for NISSAN, for INFINITI, for GTR (NISSAN), for GTR, for OPEL, for VAUXHALL, for OPEL (SOUTH AFRICA), for PEUGEOT, for PORCHE, for RENAULT, for DACIA, for SAMSUNG RENAULT, for SAAB, for SEAT, for SKODA, for SMART, for SPRINTER, for SUBARU, for SUZUKI, for TOYOTA/LEXUS, for VOLVO, for VW, for BENTLEY, for BUGATTI, for LAMBORGHINI, for Holden

LAUNCH X431 Creader Elite CRE200 Technical Specifications :

Screen : 4 inch Touch Screen with a resolution of 480*480

CPU : 4-core 1.3 GHz Processor

Memory : 1GB RAM + 16GB ROM

Wifi : 802.11b/g/n 2.4GHz

USB : Type C

OBDII input voltage range : 9-18V

Working Temperature : -10 to 50 °C ( 14 to 122 °F )

Storage Temperature : -20 to 70 °C ( -4 to 158 °F )

Launch Creader Elite CRE200 Packing List

1pcs CRE200
1pcs Retail Box
1pcs User's manual
1pcs USB cable