1.Supports All OBDII functions, turn off check engine light, reset monitor, read enhanced data etc.
2.Support Multi-languages; works with All 12V standard obd2 protocols vehicles.
3.User-friendly Design,I/M Hot keys and color screen .
4.Emission Test Helper,Red-Yellow-Green Leds and build-in speaker indicate emission monitor status.
5.No battery required, it is charged directly from the OBDII car scanner interface in your vehicle( just need to turn on the ignition of your vehicle).
6.Multi-language:English , French , Russian , Spanish ,German,Japanese ,Portuguese
Launch CR3008 Full OBDII Functions List (Engine Check ) Including:
1. Read engine or emission related fault codes error codes.
2. Erase and delete the fault code,
3. Turns off Check Engine Light (MIL), warning light, clears codes and resets monitors
4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
5. Easily determines the cause of the Check Engine Light (MIL), show definitions of the fault codes.
6. Displays monitor and I/M readiness status (emissions)
7. Reads live PCM data stream
8. Displays Live sensor data readings in both text mode and graph mode (1996 and newer vehicles)
9. Storage data stream, and playback, printing the stored sensor readings.
10. Views freeze frame data to analyze the real cause of engine failures
11. Displays live O2 oxygen sensor test data
12. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems.
13. EVAP System test data
14. Battery Voltage real time monitoring and health status check.
15. Retrieves vehicle information (VIN code, CIN and CVN Number)
16. Built-in DTC look-up library and display definition.
17. Troubleshooter code tips guide technicians to the root cause of a trouble code faster, save diagnosis and repair time
18. Internet updateable and upgradeable, life-time update free
19. Prints the stored trouble codes/ freeze frame/ live data readings via PC, works for all windows system.
LAUNCH CR3008 OBD2 Code Reader Compatible Vehicles (Important)
Launch cr3008 supports both diesel and gasoline vehicles, as long as the car is compliant with standard OBDII protocols, with OBDII 16pins Diagnostic Port.
American (USA) cars
for Standard OBD2 Cars from 1996 to Now:
for Chrysler, for Ford, for GM, for Jeep
for Standard OBD2 Cars from 2003 to Now:
for Alfa Romeo , for SAAB , for Acura , for Opel, for Audi , for Seat , for Peugeot , for Bentley , for Skoda , for Daewoo, for Benz , for Daihatsu , for Land Rover, for BMW , for Vauxhall , for Citroen, for Volvo , for Fiat , for VW , for Ford , for Jaguar
for Standard OBD2 Cars from 2007 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota.
for Standard OBD2 Cars from 2011 to Now:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.
Not Support Russian Cars before 2012, VAZ,UAZ,LADA ; Not works with trucks
for Renault, SsangYong, please contact us before purchasing.
Please leave us message in below format, we will reply you within 8 hours. for example : xx, 2005, 2.0cc, Diesel
Support OBD 2 protocols car : (must be OBD2 porotocols car )
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)