Konnwei Kw510 12V Car Battery Tester Full Automatic 5A Auto Battery Charger 3 In 1 Wet Dry Agm Gel Lead Acid Pulse Repa
KONNWEI KW510 12V Car Battery Tester Full Automatic 5A Auto Battery Charger 3 in 1 Wet Dry AGM Gel Lead Acid Pulse Repair Tools
Top Reason To Choose KONNWEI KW510
1. Support car battery health and status check, charging, and repairing all in one.
2. High Accuracy battery tester and testing range from 100-2000CCA.
3. Pulse Repair function helps you to fix and increase your battery life and performance, can be verified from KW510 battery testing SOH
5.2.4 inch large LCD screen, the display result is clear and readable even in bright sunny days.
6. Multilingual operation interface, multilingual user friendly manual including RU, FR, ES, DE, EN
7. 5 protections from AC to DC charging, over-heat and over current protection.
KONNWEI KW510 With 12V Car Battery Test Function
1. Test batteries to IN/OUT of the vehicle accurate results in milliseconds,analysis result with Good or Replace.
2. Large and easy-to-read Test results based on CA,CCA,BCI,MCA,JIS,SAE,EN,DIN and IECS Standards.
3. Vehicle cranking system test, cranking time,voltage and status.
4. vehicle charging system test load voltage,unloaded voltage,ripple status and charging system status.
KONNWEI KW510 With 12V Car Battery Charging Function
12V 4Ah-100Ah car battery can be charged full power within 12 hours .
Charging a low-voltage battery with 2 volts, with a maximum output of 12 volts and 5 amperes. And there are European standard and American standard plugs to choose from, which can meet the car charging needs of all customers and save the money of going to the repair shop.
Step1：Red clip clamp battery positive electrode，black clip clamp battery negative pole.
Step2：Plug in 220V/110V For Household use.
KONNWEI KW510 With 12V Car Battery Repair Function
One-click Enhanced Pulse Repair
Automatic sulfating and acid stratification detection, the KONNWEI KW510 advanced repair mode can repair and reverse the damaging effects when batteries are left uncharged for extended periods to improve battery performance and longevity. (Note: The pulse repair function can only be used when the car battery is disconnected from the car).
Smart Temp Compensation That Fits All Climates
Highest Safety Priority: safety charging is the most important thing! Except the smart temp compensation that fits all climates and auto change to low current mode after fully charged,
KW510 also supports up to 8 kinds of protection like reverse polarity, overload, over-current, overheat, cooling system, fireproof material, short circuit protection, etc.
Fits All 12V 4Ah-100Ah Lead-acid Batteries
Designed for testing and charging 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Compatible with all types of vehicles - charge and maintain cars, motorcycles, lawn mowers, ATVs, lawn tractors, trucks, SUVs, boats, PWCs, classic cars, and more.
KONNWEI KW510 Car Battery Tester Support Multi-language
KW510 Battery Tester Sizes And Specification:
AC input： 100-240V/50-60Hz
Output： Voltage 12V
Output： Current 5A
Output Volt No Load： 13.8V
Minimum Start Volt： >2.0V
Input Power with Load： Max 80W
Input Power No Load： 3W
Charging Capacity Range ：4AH-100AH
Temperature Compensation： Yes, Winter & Summer Mode
Compatible Battery Type： All types of Lead-acid batteries
KONNWEI KW510 Car Battery Tester Package List:(100% Original)
1* KONNWEI KW510
1* Multi-language User Manual(EN,FR,ES,DE,RU)
1* Charge Cable(US or EU)
1* Carton Box