1.Emitter: Three LEDs on a copper DTP MCPCB e.g. Cree XP-G3 (Cool White 6500K), Cree XP-L HI (Neutral White 4875K), or Nichia 219C LED (Neutral -White 4000K, Warm White 3000K)

2.Optic: Standard TIR Optical Lens

3.Lens: Glass with anti-reflective coating

4.Flux: ~2000 lm (XPG3)

5.Intensity: ~8100cd ANSI beam distance 180m (XP-G3)

6.Modes: Three general modes, plus hidden Moonlight and Turbo

7.Battery: One 18650 cell with max length 70MM

8.Body: Aluminum with hard-coat anodizing

9.Switch: Electronic rubber side switch

10.Ingress rating: Equivalent to IPX8

11.Weight: Approximately 67g without cells

12.Size: 27* 99.5* 25mm

13.Waterproof: IPX-8, underwater 2 meters

Product Parameters

Operation Instruction

General mode:Low-Mid-High;

Hidden mode:Moonlight,Turbo

1.ON/OFF:One click for ON,press and hold for 1 second for OFF.When the light is on,tap the switch to cylce through general modes.

2.Moonlight:Press and hold the switch for 1 second from OFF,another click to enter the general mode.

3.Turbo:Double clicks from ON,another click will enter the general mode.

4.Instant High:Double clicks from OFF will enter High mode,another click will enter the general mode.

Warnings

1.Keep away from children.

2.Do not point the light directly at a person,animal,moving vehicles or flamable materials.

3.Donot throw into fire in case of explosion.

4.To charge the battery three months a time if long time no use.

Package Includes

1.1*D1 Flashlight

2.1 * Use manual

3.1 * Lanyard

4.2 * spare waterproof ring

Low-voltage Protectioon

When the battery voltage is low,the flashlight will enter protection.

1.Battery under 3.2V,max mode performance 60%.

2.Under 3.1V,flashlight blinks as a reminder,max mode performance 20%.

3.Under 3.0V,Moonlight only.

4.Under 2.9V,the flashlight will shut off automatically.

Over-heat Protection

The flashlight will accumulate lots of heat when running on High or Turbo for a long time.To ensure a comfortable user experience,the light will enter the over-heat protection and downshift the outputs automatically when the temperature reaches above 45 degrees.And recall the previous output when the temperature goes under 40 degrees.

About Protection

1.Use only reputable 18650 cells of known origin.The supported maximum length is 70 mm.

2.Remove and recharge the cell when the low vltage indication is given by the Lamp.

3.The extraordinary energy density that 1860 cells offer also means that hazardous conditions are created when a cells is short-circulted or damaged.Always treat cells with respect and properly dispose of damagee cells.