DUOYI DY26A Ultrasonic Leak Location Determine Meter  Car Window Sealing Flaw Gas Vaccum Pressure Locator  Sound Light Alarm

DY26A is designed to locate leaks in pressure and vacuum system.
It can be used to detect and locate the source of the ultrasonic emission generated by gas or liquid f1owing through a small restrictive opening.
lt uses the advanced ultrasonic sensing technique and features small size, light weight;reliable detection, easy use and utility.

If you are outside, hold the DY26A along the object to measure the leak, you can find the leak location

If you are in a sealed container, you should check if the container is leaking. Choose DY26

Features:

1. Sense pressurized leaks, detects electrical arcing, and finds falling solenoids, valves and bearings .

2. Comes with a transmitter that emits an ultrasonic frequency to help locate leaaks that are not pressurized.

Enough to emit frequencies the  detector can pick up.(Only DY26)

3. Detects any pressurized leaking gas, including chlorofluoro carbon(CFCs), hydrofluoro carbon(HFCs),

nitrogen(Ni), carbon dioxide(CO2) and steam.

Specification:

 Alarm Indication: The"LEAK" LED lights and the"ticking tone" increases in frequency.
Frequency Response: 40kHz ± 2kHz


 Operating Condition: temperature:0°C - 40°C  
Relative humidity: <80%
Battery: 9V, 6F22 or equivalent
Size: 171*43*38mm
Weight: about 240g

Note :

1.There are many factors involved in the ultrasonic leak detection, such as the pressure within the vessel under test,

hole shape, hole size, temperature etc. In some cases, the ultrasonic sound caused by leak is very weak,

so you should set the DY26A's sensitivity to the highest level at the beginning of leak detection.

2.If the detected ultrasonic sound is too intense so that it is impossible to pinpoint the leak because the" ticking tone"

is too high in frequency, you should decrease the sensitivity with the sensitivity knob.

3.In noisy environments, you can decrease the sensitivity appropriately to exclude the disturbance caused by noise.

4.When DY26A detects ultrasonic sound, move its probe around the suspected leak to determine

whether the detected ultrasonic sound is from the suspected leak or from other areas.

5.Because ultrasonic sound attenuates rapidly when it travels over distance, move the probe of DY26A

as close as possible to the suspected leak, remember to decrease the sensitivity if necessary.

During location, move the probe slowly.

Dear friends, receive our products, please confirm receipt, if you have any questions please contact us first. If you do not receive manual, please contact us, we will give you send an electronic version of the manual to your mailbox.

Because of 's aviation regulations, our product does not include the battery, Battery is very cheap, please to buy yourself store, thank you for your understanding and support

Noted: The buyer in Brazil / Argentina, Must be provided the CNPJ (CPF) /VAT No. when order to us; For Russian buyers, should be offer The Full Name of consignee

We accept online payment in
If there is any import duties or taxes,it is the buyer's responsibility.
Please make payment within 5 days after you place your order.

SHIPPING & DELIVERY

We will ship out the unit to you by EMS or FedEx or DHL or TNT or UPS or CHINA POST, It will decided by seller according to your location.
We will ship out the unit to the Express company first, it will take about 2-3 days, and then express company will deal with the package, so you can check the tracking number online after about 4 days. Please note this.

CONTACT US

Welcome!! Please read ALL POLICIES of us before your purchase.
If you have additional questions or concerns about this item, please contact us via email or trademanager. We will response the most E-mail within 24 hours.

RETURN POLICY

If the item is defective, please notify us within 7 days after the receipt of the item.
The item shall be return in its original condition, in order to get it refunded or replaced
Notice:
Because of air shipping regulation, it is not allowed to ship liquid or something like that, so the coupling agent will not be sent. You can use butter or slica gel to replace.
When to measure flow rate, you must use coupling agent, otherwise no signal or inaccuracy.