Download Cable Cp2102 Pl2303ta Ch340g Original Download Cable Chip For Arduino Raspberry Pi Win10/Mac Os Download Cable







Describe:
CH340G USB to TTL adapter download cable:
USB to serial port module based on CH340G. It is commonly used to debug various TTL serial devices such as serial port WIFI, serial port MP3, serial port camera module, upgrade router firmware, and directly burn programs to Arduino Pro Mini and LilyPad Arduino.
feature:
Working voltage: 5V
Logic voltage: 5V
Pin output mode: 4P DuPont line
Serial port baud rate: up to 115200bps.
Support USB1.1, USB2.0, USB3.0
USB to serial chip (CH340G) supports Win XP/7/8/10, Linux, Mac OS
USB cable length: 1M
PL2303TA USB to TTL download serial cable:
This is a newly designed product, using the Taiwanese company’s prolific PL2303TA production chip. PL2303TA provides a full-duplex asynchronous serial RS232 device that can be easily connected to any universal serial bus (USB) host. PL2303TA is perfectly compatible with win XP / VISTA / 7/8 / 8.1 systems, can simulate most operating systems, allowing existing COM port-based applications to be easily transplanted and connected to USB, and can achieve traditional COM without rewriting the COM port software Application of mouth.
By using the advantages of USB batch transmission mode, large data buffer and automatic flow control, PL2303TA can achieve higher throughput than conventional UART (Universal Asynchronous Receiver Transmitter). The real RS232 signal transmission rate is higher than 115200 points and can be used for more High performance. PL2303TA flexible baud rate generator can be programmed to generate 75 basis points and 6 million basis points at any rate.
PL2303TA is designed for use in mobile and embedded solutions, providing a compact product that can easily adapt to any connector and handheld device. The PL2303TA's business or suspend mode power consumption is very small, which is very suitable for providing sufficient power for devices connected to the bus for operation.
This product is designed for applications such as laboratory, product testing, low-cost MCU communication, etc. There are four main points:
Red+5V
Black ground
White RXD
Green TXD
application:
Solution for upgrading traditional RS232 equipment to MCU USB interface
USB to RS232 converter/cable/dongle
Data transmission line health/medical USB interface
Personal infotainment/media player docking USB interface
Mobile phone/handheld computer USB interface data transmission line
Serial-over-IP wireless solution
USB barcode/smart card reader
GPS / navigation USB interface
Point of Sale (POS) Terminal/Printer
Computer docking station/port replicator
Industrial/instrumentation/automation control USB interface
USB modem / wireless / Zigbee USB interface
USB interface to set-top box (STB)/home gateway
Battery charger application
USB interface for MCU-based devices
CP2102 chip USB 2.0 to TTL serial download cable:
This USB to TTL (5V) cable is based on the well-known CP2102 chip in the industry and has good stability and cost-effectiveness. Can make your products extremely competitive. This cable leads to four 2.54 DuPont terminal interfaces, namely VCC, GND, TXD and RXD. The length of the cable is approximately 1 meter.
feature:
CP2102 USB to TTL (5V) has 4 pins: red +5V (VCC), black: GND, white: TXD (need to connect another RXD), green: RXD (need to connect another TXD)
USB function controller
USB specification 2.0 compatible, full speed (12 Mbps)
USB Suspend State Asynchronous Serial Data Bus (UART) supported by SUSPEND pin
All handshake and modem interface signals
Supported data format
Data bits: 5, 6, 7, and 8
Stop bits: 1, 1.5 and 2
Parity: odd, even, mark, space, no parity
Baud rate: 300 bps to 1 Mbps-576 byte receive buffer, 640 byte send buffer
Support hardware or X-On/X-Off handshake
Event role support
Disconnected transmission virtual COM port device driver
support system:
Windows 10/8/7/Vista/Server 2003/XP/2000
Mac OS X
Linux
Package Included:
1 x CH340G USB to TTL adapter download cable
1 x PL2303TA USB to TTL download serial cable
1 x CP2102 chip USB 2.0 to TTL serial download cable