Diy Radio Kit Fm Stereo Radio Module 76-108Mhz Wireless Receiver Lcd Display Dc 3V Electronic Soldering Practice Digita
This is an FM radio DIY soldering DIY kit, the picture shows a finished work when you receive the kits, it will be a component, not a finished work！！！！！
This little FM radio is not only a radio but also a time clock. For example, you can listen to the FM radio wherever you are, meanwhile, it is also a clock, you can know what time it is anytime! Especially, you can decide when you will listen to the radio via setting an alarm clock. If you set the alarm clock at 8:00 AM every day, it will play the radio station that you listen to last time.
It is a kindly feeling to keep this portable radio staying with them when you are busy and does not have time to accompany them.With this portable am FM radio, you will put down your phone, iPad, and computer, get away from the hustle and bustle, purely enjoy the radio time.
Not only an FM radio but also a time clock function
A new upgrade on this FM radio-big and clear LCD screen. It is very convenient for you to see all FM channels on it and you also can set time on the display, using it as a clock. The timing system is12 Hours. (Tips: This is a 12-hour system clock, If you want to set the clock, please note "AM" and "PM“!）
Without any complicated design, this am FM transistor radio is easy for both older and children to operate. The tuning dial is easy to tune to choose the station or rotate the volume. Very convenient design in today's busy life, simple operation yet user friendly.
Earphone Jack- own quiet space
Wants to have some private space to listen to this portable battery-operated radio? Do not want to disturb others while listening outside? Just plug your earphone into the 3.5mm earphone jack, that meets your special need. Immerse yourself into the radio world.
How to set FM radio/ time clock?
There are Radio ON/Off and Clock ON/Off buttons, and there are another 4 pcs buttons.
POWER ON/OFF BUTTON: It is used to switch FM and Time.
AL ON/OFF BUTTON: It is used to turn ON or OFF alarm function. It turns on the alarm function if there is a wireless symbol on the LCD screen at the first line.
MINset BUTTON: It is used to change the value for minutes. It supports press once or keeps press. Note: Its value can only increase, not decrease. The minute's value reaches the maximum value(59) and then increases from 0 again. Pay attention to AM and PM on the LCD screen at the first line.
HEset BUTTON : It is used to change the value for hours. It supports press once or keeps press. Note: Its value can only increase, not decrease. The hour's value reaches the maximum value(12) and then increases from 0 again. Pay attention to AM and PM on the LCD screen at the first line.
TIMEset BUTTON: It is used to enter set time mode. It is recommended to press and hold this button first and then presses ‘HEset’ and ‘MINset’ to calibrate the RTC time.
ALdisp BUTTON: It is used to enter set alarm mode. It is recommended to press and hold this button first and then presses ‘HEset’ and ‘MINset’ to set alarm time. It will display alarm time by press ‘ALdisp’ at any time.