BM560 6V 12V Car Battery Tester Analyzer 100-2000 CCA 2AH-220AH

Does your battery need to be replaced?

There are more and more on-board electrical appliances, and the requirements for battery capacity and quality are getting higher and higher. Can your batteries still support it?

What is the BM560?

BM560 6V 12V Car Battery Tester Analyzer with 1.8 inch TFT color screen, which is mainly targeted to analyze batteries healthy status to calculate the actual cold cranking, capability of batteries and the aging extent, which provide reliable analysis evidence for the test and maintenance of batteries.

BM560 VS KW650:

Multi-Language:

English French Russian German Italian Japanese Spanish Portuguese Polish Chinese

Wide Range Of Applications of BM560 6V 12V Car Battery Tester Analyzer:

It can test 6V/12V batteries, suitable for a variety of common models and equipment, one machine for multiple purposes.

Quadruple Protection Of BM560 6V 12V Car Battery Tester Analyzer :

【Overvolatge Input Protection】Below 20V, it can be tested at will without damage the bad internal circuit board has a short circuit.
【Reversible Access】The positive and negative poles are connected incorrectly, the device and batteries are not damaged.
【Poor Contact Prompt】When the test clip does not clamp the positive and negative electrodes of the batter, the display will prompt.
【Built-in Buzzer to Remind】During the test, when batteries are in poor condition, the device will give an audible reminder.

Multiple Functions In One BM560 6V 12V Car Battery Tester Analyzer:

The four functions can be switched at will to help you quickly detect batteries status of your vehicle.
【Batteries Test】 Life / Voltage / CCA / Internal resistance
【Start The Test】Discharge performance
【Load Test】 Engine performance
【Charging Test】 Engine charging system

Advantages of BM560 6V 12V Battery Tester Analyzer

1. Voltage Waveform Monitoring:

Monitor batteries status in real time, understand the current floating size of batteries voltage, and have automatic storage and playback functions.

2. Support Multiple Battery Types - BM560 6V 12V Battery Tester Analyzer

It supports a variety of battery standards around the world, can test almost all vehicle start-up lead-acid batteries, and has a wide range of applications.
●EPS lead-acid battery;
●Vehicle start battery;
●AGM / EFB start-stop battery ;
●Electric vehicle battery ;
●UPS lead-acid battery ;
●Gel battery
Note: UPS battery/electric vehicle battery/motorcycle battery can only measure internal resistance/power/voltage, not battery life.

3. Low Frequency Constant Current Test - BM560 6V 12V Battery Tester Analyzer:

Give the battery a fixed frequency and current test signal, sample, rectify, and filter its voltage, and then calculate the internal resistance of the battery.

4. Ten Major Test Standards：GB (2AH - 220AH ):

Geometry supports all current common battery standards, and a wide range of tests can meet your various needs.
●CCA (100 - 2000 )
●IEC (100 - 1400 )
●EN (100 - 2000 )
●DIN (100 - 1400 )
●CA (100 - 2000 )
●BCI (100 - 2000 )
●MCA (100 - 2000 )
●SAE (100 - 2000 )
●GB (2AH - 220AH ) Important breakthrough ●JIS (26A17 - 245H52 )

5. HD Color Screen - BM560 6V 12V Battery Tester Analyzer:

High-definition TFT LCD screen display, will not appear ordinary LCD lack of characters and broken strokes, etc., with backlight function

6. Ripple Test of OBDResource BM560 6V 12V Battery Tester Analyzer:

Test the charging system of the engine, the smaller the waveform fluctuation, the more stable the voltage, indicating that the battery is in good condition. Note: If the test result is normal, the battery is charged normally. If the voltage reading is greater than 15.0V , please check the voltage regulator; if the voltage reading is less than 13.3V, Please check the connection points, wires and engine.

7. Screenshot Function:

It has a one-click screen capture function with long press "Up" and " Down" button., which is used to capture and save important data, fast and convenient. ( Note: The device can store up to 10 pictures )

8. Mini USB Interface- Free Update Lifetime:

It is used for software upgrade, no need to install driver, the process is simple and easy to operate.

9.Use High Quality Wire:

Selected high-quality environmentally friendly materials, good elasticity, not easy to break, tough and durable.

Parameter Information of BM560 6V 12V Battery Tester Analyzer

Let you quickly understand the product and use it more easily!

BM560 6V 12V Battery Tester Analyzer Details:

Exquisite industrial manufacturing, Stylish personality.

【Non-slip Design】Conducive to one-handed operation.
【Integrated Line Machine Design】The interface is stable to prevent falling off and loss, and the wire is strong and not easy to break.
【Physical Button】 Fast response and Excellent finger feeling.
【Alligator Clip】Pure copper plating, large opening range, strong bite force.

Packing List

1pc * Packaging Box
1pc * BM560 6V 12V Battery Tester Analyzer With Alligator Clip
1pc * English User Manual

Dear EU Clients:

Order from warehouse no TAX/ VAT

Delivery time 3-7 days.

if every I could  help

pls feel free to contact ME

Sincerely

Emma