OBDResource BM520 Battery Analyzer 6V 12V 24V

OBDResource BM520 is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking, capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery. OBDResource BM520 notifies the users to replace battery in advance when the battery getting aged.

Quadruple Protection Of BM520 Battery Analyzer 6V 12V 24V

【Overvolatge Input Protection】Below 36V, it can be tested at will without damage the bad internal circuit board has a short circuit.
【Reversible Access】The positive and negative poles are connected incorrectly, and the device can be normal start, the device and battery are not damaged.
【Poor Contact Prompt】When the test clip does not clamp the positive and negative electrodes of the batter, the display will prompt.
【Built-in Buzzer to Remind】During the test, when the battery is in poor condition, the device will give an audible reminder.

Does your battery need to be replaced?

There are more and more on-board electrical appliances, and the requirements for battery capacity and quality are getting higher and higher. Can your battery still support it?

Wide Range Of Applications of OBDResource BM520 Car Battery Tester

It can test 6V/12V/24V three different types of batteries, suitable for a variety of common models and equipment, one machine for multiple purposes.

Multiple Functions In One BM520 Battery Analyzer 6V 12V 24V

The four functions can be switched at will to help you quickly detect the battery status of your vehicle.
【Battery Test】 Life / Voltage / CCA / Internal resistance
【Start The Test】Battery discharge performance
【Load Test】 Engine performance
【Charging Test】 Engine charging system

Advantages of BM520 Battery Analyzer 6V 12V 24V

1. Voltage Waveform Monitoring

Monitor the battery status in real time, understand the current floating size of the
battery voltage, and have automatic storage and playback functions.

2. Support Multiple Battery Types

It supports a variety of battery standards around the world, can test almost all vehicle start-up lead-acid batteries, and has a wide range of applications.
●EPS lead-acid battery;
●Car start battery;
●AGM / EFB start-stop
battery ;
●Electric vehicle battery ;
●UPS lead-acid battery ;
●Gel battery

Note: UPS battery/electric vehicle battery/motorcycle battery can only measure internal resistance/power/voltage, not battery life.

3. Low Frequency Constant Current Test

Give the battery a fixed frequency and current test signal, sample, rectify, and filter its voltage, and then calculate the internal resistance of the battery.

4. Ten Major Test Standards：GB (2AH - 220AH )

Geometry supports all current common battery standards, and a wide range of tests can meet your various needs.
●CCA (100 - 2000 )
●IEC (100 - 1400 )
●EN (100 - 2000 )
●DIN (100 - 1400 )
●CA (100 - 2000 )
●BCI (100 - 2000 )
●MCA (100 - 2000 )
●SAE (100 - 2000 )
●GB (2AH - 220AH ) Important breakthrough
●JIS (26A17 - 245H52 )

5. Regardless Of Positive and Negative

BM520 Battery Analyzer has a protection function, even if the positive and negative polarity is wrong, the device can start normally, and the device and battery will not be damaged.

6. HD Color Screen

High-definition TFT LCD screen display, will not appear ordinary LCD lack of characters and broken strokes, etc., with backlight function.

7. Ripple Test

Test the charging system of the engine, the smaller the waveform fluctuation, the more
stable the voltage, indicating that the battery is in good condition.

Note: If the test result is normal, the battery is charged normally. If the voltage reading is greater than 15.0V ( for a 24V system, the reading is greater than 30.00V ), please check the voltage regulator; if the voltage reading is less than 13.3V ( for a 24V system, the reading is less than 26.60V ), Please check the connection points, wires and engine.

8. Screenshot Function

It has a one-click screen capture function with long press "Up" and " Down" button., which is used to capture and save important data, fast and convenient.

( Note: The device can store up to 10 pictures )

9. Mini USB Interface- Free Update Lifetime

It is used for software upgrade, no need to install driver, the process is simple and easy to operate.

10. Multi-Language Available of Car Battery Tester BM520

English French Russian German Italian Japanese Spanish Portuguese Polish Chinese

11. Use High Quality Wire

Selected high-quality environmentally friendly materials, good elasticity, not easy to break, tough and durable.

BM520 Battery Analyzer 6V 12V 24V Parameter Information:

Let you quickly understand the product and use it more easily!

BM520 Car Battery Analyzer Details:

Exquisite industrial manufacturing, Stylish personality.

【Non-slip Design】Conducive to one-handed operation.
【Integrated Line Machine Design】The interface is stable to prevent falling off and loss, and the wire is strong and not easy to break.
【Physical Button】 Fast response and Excellent finger feeling.
【Alligator Clip】Pure copper plating, large opening range, strong bite force.

Battery Analyzer Compare

● meas support
━ means doesn't support

BM520 Battery Analyzer 6V 12V 24V Packing List:

1pc * Packaging Box
1pc * Leather Box
1pc * BM520 Battery Tester With Alligator Clip
1pc * English User Manual