- Speedometer:

Ideal for when the speedometer of the vehicle breaks or some other problem, to pull the information of the central of the vehicle and to display in this equipment. It is also possible to place a speed alert, so that arriving at the programmed speed it emits an audible alert.

- RPM, Tachometer:

Ideal for vehicles that do not have a spigot, it marks the engine revolutions per minute. You can use a bar graph at the bottom of the screen as you can see the rotation in other locations.

- Fuel Consumption (In MPG or L / 100Km):

It allows to display the instantaneous or average consumption of the vehicle. It can be displayed in a bar that sits on the bottom of the product as it can also be displayed in other places.

- L / 100Km Division of the value informed by the equipment per 100.

Eg: 11 Liters per 100 Kilometers correspond to 9,09 Kilometers per Liter consumed.

- MPG: Multiplication of the value informed by the equipment by 0.41.

Eg 11 Miles per Gallon corresponds to 4.51 Miles per Liter.

- Accelerator position:

It shows which the accelerator pedal is pressed, when pressing the pedal completely it displays 100% and when it is half accelerated it goes to 50% for example.

- Fault Diagnosis (Checking and Cleaning Errors):

If the injection light is on you can search for the error code and even clean the injection errors if the problem has already been solved.

[Driving Safety&Safety Escort] The vehicle data is displayed directly in front ofthe drivers field of vision, and the driver can easily obtain driving information without having to bow his head

[Smart Light Senor & 2.4" HD Large Screen] Smart light sensing adjusts brightness, making it easier for owners to check data. Large 2.4" HD screen present a better vision experience.

[Read & Clear Car Fault Code] With code definitions, such as Reading Codes Scan error Codes & Clear Data Stream, diagnosing and repairing is now easier than ever! Supports full OBD protocols car.

[Safety Alarm Functions] AUTOOL X50 Plus Car OBD Multi-function Meter allows supporting water temperature early alarm, over-speed early alarm, shifting reminding early alarm and vehicle fault early alarm.

Specifictions:Specifictions:

Operating voltage: DC 10-18V

Operating current: <80mA

Sleep current: <15mA

Operating temperature: -20~85℃

Display: 2.4 inch

Resolution: 220*180

Product Size: 57mm×67mm×46mm

Cable Length: About 1.2m

Note: Due to the different measurement methods, there may be an error of 1-2 cm.

Hardware:

32-bit ARM CORTEX-M3 CPU;

With 72MHz maximum operating frequency;

Support of multiple high speed automotive communication protocols.

Notice:

This device based on OBD2 protocols,Please contact the seller before ordering.This product only supports a petrol car, does not support electric vehicles or hybrid car.

Supports OBD-II /EOBD protocols and J1850(J1850 PWM, J1850 VPM).Can not support JOBD and SAE J1850 protocols.I suggest you ask us before you make order, espacially your car is Ford , Renault , Ssangyong, LADA.

Note 1 : if your car has one of the obd2 protacol,your car will be suitable.but many Japanese carsthat can't connect devices properly,it is not recommended to buy.thanks.(Such as : DAIHATSU，Nissan，Honda，Toyota，Kia，Isuzu）

Support Cars in European: After 2008 year

Support cars in United States: After 2006 year

Support cars in Asia and Russian: After 2012 year

Note 2 : If your car model is the following brand, please refer to the following tips.you must according to the prompts,then to decide whether if the item is suitable for your car.thanks.Such as:

Ford（after 2012），

Chevrolet（after 2010）,

Huyndai（after 2012）,

Opel Vivaro（after 2012）,

Volkswagen（after 2008）,

Renault（after 2012），

Volvo（after 2012）,

Dodge（after 2008）,

Lincoln（after 2008）,

Skoda（after 2012）,

Seat Ibiza（after 2012）,

GrandPrix（after 2008）,

Buick（after 2008）,

Jaguar（after 2012）.

Packing List

1pc* Main unit of AUTOOL X50Plus Car OBD Multi-Function Meter

1pc* OBD Cable

1pc* Manual