Autel Maxivideo Mv108 Digital Inspection Camera Video Scope For Autel Ms909/Mk908/Ms906ts/Ms906bt/Ms908p 8.5Mm (0.33&Qu
● Autel MaxiVideo MV108 Inspection Endoscope is wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections.
● MV108 is super bright LED and high resolution provide crystal clear images. Powerful and perfect for inspecting most spark plug holes. White LED lights to illuminate the inspection areas.
● MV108 work around the vehicle: 2.54cm to 35.56cm (1” to 14”) cable being long and flexible enough to stay in position perfectly / Super clear camera (640*480 8.5mm imager) surrounded by bright LED lights providing crystal clear images / 3 practical head accessories (Magnet, Hood, Mirror) aim to deal with any unexpected and tricky events.
● MV108 can work with MaxiSys tablets such as MaxiSys Elite, MS906BT, MS906TS, CV, MaxiDAS DS808, MS906CV, MS908S, and MS908S Pro to get the optical image evaluation, detection, and diagnosis.
● Removable Image Head Cable connects to the tool when performing digital inspections for image and video viewing
The power of MaxiVideo inspection camera is directly supplied by the USB port, and no external power source is needed.
1.Removable Imager Head Cable – connects to the tool when performing digital inspections for image and video viewing
2.Handgrip – ergonomically designed handle for comfortable grips and agile operation
3.USB Cable – connects the Digital Inspection Camera to MaxiSys tablet
It only takes 3 steps to start !
1.Connect the Removable Imager Head Cable to the Handgrip. Make sure the key and slot are properly aligned. Once they are aligned, finger-tighten the knurled knob to hold the connection firmly in place.
2.Power up the MaxiSys Tablet, and select the "Digital Inspection" application on the Job Menu.
3.Connect the MaxiVideo inspection camera to the MaxiSys Tablet with the USB connection, and that's it!
● Optimal Viewing Distance: 1" to 14"(2.54cm to 35.56cm)
● Image Capture: 640x480
● Image Head: 8.5mm (0.33")
● Operating Temperature: Main Unit: 0°C to 50°C (32°F to 122°F) / Cable: -10°C to 70°C (14°F to 158°F)
● Cable: -10°C to 70°C (14°F to 158°F)
● Storage Temperature: -20°C to 75°C (-4°F to 167°F)
● Waterproof: Imager head and cable to 1m(3')
● Weight: 0.2kg with 5.5mm diameter imager head
● Compliance: FCC (EMC), CE (EMC and LVD)