ANCEL BST100 12V Car Battery Tester Charger 2000CCA BCI Analyzer Battery Charging Cranking Test CA MCA EN OBD2 Diagnostic Tool

Ancel BST100 battery tester is used for lead-acid starting battery, along with checking the following conditions of the battery, starting up, charging, and loading. With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing

Why choose BST100 As Your Favorite Car Battery Tester Tool?

��1.Small compact design, scan faster and indicates test results directly. Even a beginner can use this unit to analyze any 12V batteries healthy, tells you everything about the battery: voltage, charge, cranking power, and how much life is left in the battery (level of Ohm resistance). Does it quickly and precisely.

��2.Much wider test range (100-2000 CCA) and more accurate compared to its competitors. Test results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC Standards.

��3.Provides check the Alternator's charging and Starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.

��4.The Ancel BST100 battery tester is well built with a large LCD display, indicates test results directly. no internal batteries required and gets the power directly from the 12V battery.

��5.It's equipped with cable and made of a very thick flexible insulator, much safer than others selling on the marketplace. There are 4 buttons on BST100, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu.

ANCEL BST100 Car Battery Charging Test Function

��1.Identify battery status Good or Replace

��2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

��3.Check Internal resistance value (Ohm)

��4.Display battery life in percentage (%)

��5.Battery Cranking Test, load test

��6.Battery Charging Test, Ripple Test

��7.Support battery ripple test and review test data

ANCEL BST100 12V Car Battery Cranking Tester Features:

✅1.Fast and smooth running speed with STM-32 chip set hardware

✅2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%.

✅3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market.

✅4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate.

✅5.Unique battery results display in percentage and meter mode.

✅6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.

✅7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.

✅8.Directly test the battery with loss of electricity, no need to full charge before testing.

✅9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.

✅10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell

ANCEL BST100 Car Battery Analyzer Tool Advantage

��Simple and easy to use
��Tests batteries on and off the vehicle
��Accurate results in milliseconds
��Battery life analysis
��Analysis results: Good or Replace
��Large easy to read LCD screen
��Test results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC Standards
��Quick test - inputs battery volume (AH), then shows battery status
��Vehicle cranking system test - cranking time, voltage and status
��Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status

Ancel BST100 Car Battery Tester Application

Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.

ANCEL BST100 Battery Test Supports Multi Language

English, French, German, Russian, Spanish, Italian

Advantages of this method

(1) It can be used for checking almost all the batteries including low capacity battery and internal resistance of the notebook battery exclusively.

(2) It will not harm the battery by using this method.