Adblue Emulator Obd2 For Euro 4/5 For Volvo For Scania Truck Adblueobd2 Emulator Box For Renault/Iveco/Daf Ad Blue Emul
AdblueOBD2 Emulator for D-A-F/Ive-co/Be-nz/Ren-ault/Fo-rd/M-A-N/Sca-nia/Vo-l-vo
Trucks Plug and Drive Ready Device by OBD2 Description:
adBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5 catalytic converter systems,even with damaged adBlue SCR system. dBlueOBD2 is easy to install
Top 5 Reasons to Get AdblueOBD2 Emulator:
1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
Installation and Calibration for DAF Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (for DAF) 6 - 15A E357 - 20A
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x adBlueOBD2 Emulator Box Interface
1pc x User Manuel Englishx CD ( usel manuel )
