75gpd RO Membrane ULP1812-75 for Water Filter Reverse Osmosis

ULP1812-75 residential RO membrane element is designed to thin layer composite to provide high quality water filtration from a wide range of water source. Each membrane is packaged 100% dry for extended shelf-life and are built to standard dimensions so that it will fit common membrane housings. ULP1812-75 membrane can work under low pressure with 75 gpd permeate flow rate and is tested and certified by NSF/ANSI to standard 58.

• Innovative thin layer composite membrane design

• Provides high rejection stability even with high TDS

• Less fouling, Less frequency cleaning and more consistent

• 100% dry membrane maximizing shelf life

• Lower consumption of chemical and longer life

• Standard dimensions to fit in commonly available housings

• Eligible for NSF/ANSI 58 certificated

• Average Permeate 75 Gpd

• Stable Rejection 97.5%

• Minimum Rejection 96%

• Dimension 1.81"x 11.73" (46x 298mm)

(Testing condition: pressure 60psi, concentration 250ppm, temperature 25C, pH 6.5-8.5, recovery rate 15%)

• Maximum Working Pressure: 300psi (2.07Mpa)

• Maximum Feed water Temperature: 45C

• Purify varying qualities of municipal water

• Water for restaurants

• Water vending machines

• Aquarium water treatment

• Softened water for homes, hotels, commercial laundries and car washes

• Post-treatment of deionized water

• Pure water for pharmaceuticals, laboratories and electronics Hemodialysis

• Oil/water separation

1pcs* ULP1812-75 RO Membrane.
Packing and shipping by international standard package. Note: Please don't forget to check, If there is coupon can be used
when you process order.